IVF centre in Goa
Consultations in Panjim · Margao · Mapusa · Vasco
Call
Page 53 of 72Genesis ART Textbook
Part 4: Cryopreservation and vitrification · Day 10
Page 53 of 72

Timing, volumes and common failures

On this page you will learn

Small numbers, large effects

Pages 50 to 52 gave you the sequence. This page is about the details that make the same protocol work in one pair of hands and fail in another. Almost every vitrification failure comes back to one of four things: time, volume, temperature or handling.

Time

Use a timer for every step, never your sense of time. Say the times aloud to your witness. Write them down.

Volume

Two volumes matter. The first is the volume you carry from one solution into the next. Carry over too much medium into ES or VS and you dilute them, so they no longer reach the concentration the protocol relies on. Pick up the cell in the smallest volume you can. The second is the volume left on the carrier. A large drop cools and warms slowly, which is exactly what vitrification must avoid. Practise until a thin film around the cell is your normal.

Temperature

Room temperature in the laboratory varies through the day and between seasons, and in Goa the afternoon can be warm and humid. If your protocol assumes a given working temperature, check it. The warming solution must be at its set temperature before you start; measure it rather than trusting the warmer's display. Liquid nitrogen in an open box gradually collects frost and debris and its level falls; use fresh, clean nitrogen for each session.

Handling and devices

At the bench: investigating a failure

When survival after warming falls, do not change the protocol on a hunch. Trace the cause:

  1. Gather the records for each failed device: operator, witness, date, protocol version, solution lot numbers and times.
  2. Look for a common factor: one operator, one solution lot, one device batch, one tank, one time of day.
  3. Check the equipment: warmer temperature, microscope stage heating, nitrogen quality.
  4. Watch the operator perform the steps with discarded material, comparing against the written protocol.
  5. Agree a corrective action with the senior embryologist, record it and check results after the change.

This is the quality-control habit you met on page 20, applied to the cryo programme.

Key performance indicators

The Vienna consensus on ART laboratory KPIs (2017) lists blastocyst survival after warming as a key indicator, with blastocyst re-expansion as a further indicator; the survival of warmed oocytes and cleavage embryos is covered by the earlier Alpha consensus on cryopreservation (2012). Each laboratory sets its own benchmarks and tracks them per operator and over time. As a trainee you are not judged on a single result; you are judged on whether you follow the protocol, record everything and improve with feedback. Your two Day 10 straws are assessed for technique, timing and record keeping.

Common errors

Check yourself

  1. Name the four groups of variables that cause most vitrification failures.
  2. Explain two ways in which carried-over volume can spoil vitrification.
  3. Survival has fallen this month. List the records you would gather first.
  4. Which consensus document lists KPIs for the cryo programme?

Contents and reading plan

Questions on this page

Is it acceptable to adjust timings to suit our room temperature?

Only through a validated change agreed by the senior embryologist and written into the protocol. Never adjust on your own.

Why record solution lot numbers?

So that a failure can be traced to a single batch of solution if one is faulty, and so that affected samples can be identified.

How can I improve my loading volume?

Practise with discarded material under supervision until a thin film around the cell is routine, and ask your trainer to check each attempt.

The Genesis ART Textbook is teaching text for trainees and doctors of the Genesis ART Academy. It is not treatment advice and not a laboratory standard operating procedure; every technique is learned under supervision. Page numbers never change.