Fertilisation check: 2PN and abnormal fertilisation
On this page you will learn
- when the fertilisation check is done and why timing matters
- what normal fertilisation looks like
- the abnormal patterns: 0PN, 1PN, 3PN and more
- how to record and report the result
What happens after the sperm enters
Once the sperm is inside, the oocyte is activated. It completes the second meiotic division and extrudes the second polar body. The sperm head decondenses. Over the next hours a male and a female pronucleus form, move towards each other and meet near the centre. Later the pronuclear membranes break down (syngamy) and the first cleavage follows (page 35). The fertilisation check catches the zygote while both pronuclei are visible.
Timing
The Istanbul consensus on embryo assessment (2011) recommends checking fertilisation at 17 hours, plus or minus 1 hour, after insemination or injection. Check too early and pronuclei may not yet be visible; check too late and they may have already faded before syngamy. Both can lead to a normally fertilised oocyte being recorded as unfertilised. This is why the insemination or injection time recorded on page 31 matters.
Normal fertilisation
A normally fertilised oocyte shows two pronuclei (2PN) and two polar bodies in the perivitelline space. The pronuclei are round, of similar size, close together or touching, near the centre of the ooplasm, each with small nucleolar precursor bodies. A clear cytoplasmic halo around the edge is common. Detailed pronuclear scoring has been studied, but its value for choosing embryos is limited; record what your laboratory form asks for and concentrate on counting pronuclei correctly.
Abnormal patterns
- 0PN: no pronuclei. The oocyte may be unfertilised, or the check may have missed pronuclei that formed early or late. Some 0PN oocytes cleave later; your laboratory policy says how these are handled.
- 1PN: one pronucleus. This may be activation without a sperm contribution, or the two pronuclei forming at different times or fusing. The meaning differs between conventional insemination and ICSI. Laboratory policy decides whether such zygotes are cultured or used.
- 3PN or more: after conventional insemination usually more than one sperm entered (polyspermy). After ICSI it often means the second polar body was not extruded. These zygotes are abnormal and are not used for transfer.
- Degenerated: dark, shrunken or lysed. Record separately; after ICSI it feeds the damage indicator (page 32).
Conventional insemination cases
After conventional insemination (page 24), the oocytes are still surrounded by cumulus cells and many sperm. Before checking, gently strip the remaining cells with a denuding pipette (page 25), then rinse the zygotes into fresh medium. Take care not to confuse a sperm head stuck to the zona with a polar body.
At the bench
- Before opening the incubator, plan the order of dishes from the injection and insemination times on the worksheet.
- Check the dish identity with your witness.
- Take out one dish at a time. Work quickly at a magnification high enough to see pronuclei clearly.
- Rotate each zygote if needed so both pronuclei and both polar bodies are seen; adjust the focus up and down through the zygote.
- Record each zygote by its position: number of pronuclei, number of polar bodies, degeneration.
- Move 2PN zygotes into the culture positions set by your protocol, separate abnormal ones, and return the dish to the incubator.
- Pass the fertilisation result to the senior embryologist, who informs the clinician.
Where time-lapse culture is used (page 39), pronuclear appearance and fading are read from the recorded images without removing the dish.
When fertilisation fails
If no oocyte or very few oocytes fertilise, the senior embryologist reviews the case: oocyte maturity, sperm quality, timing and technique notes. The clinician then discusses the findings with the couple and any change for a future cycle, such as ICSI after conventional insemination, or other options. As a trainee your part is a complete and accurate record.
Common errors
- Checking outside the time window and recording 0PN where pronuclei had formed early or late.
- Counting one pronucleus that is hidden behind the other as 1PN.
- Confusing a fragment or sperm head with a polar body.
- Keeping dishes out too long while writing.
Check yourself
- At what time after insemination is fertilisation checked, and why?
- Describe a normally fertilised zygote.
- What can 3PN mean after conventional insemination, and after ICSI?
- Why must you rotate and focus through each zygote?
Questions on this page
What does 2PN mean?
Two pronuclei: one from the egg and one from the sperm. Together with two polar bodies, this is the sign of normal fertilisation, seen about 17 hours after insemination or injection.
Are 1PN zygotes ever used?
That depends on laboratory policy and the clinician. A single pronucleus can have more than one cause, so 1PN zygotes are recorded separately and handled according to a written policy.
Why does the time of the check matter?
Pronuclei appear and fade within a window. Checked too early or too late, a normally fertilised zygote can look unfertilised.
The Genesis ART Textbook is teaching text for trainees and doctors of the Genesis ART Academy. It is not treatment advice and not a laboratory standard operating procedure; every technique is learned under supervision. Page numbers never change.
