Culture media, oil and consumables
On this page you will learn
- The main types of media used in an IVF laboratory and what each is for
- The difference between sequential and single-step culture media
- Why oil overlay is used and how oil can go wrong
- How media and consumables are tested, stored, equilibrated and traced
Media for each step
An IVF laboratory uses several media, each designed for one job. You will learn to recognise them by purpose, not by brand.
- Flushing and handling media: buffered with HEPES or MOPS to hold pH in room air. Used for oocyte pick-up, washing and procedures outside the incubator.
- Fertilisation media: bicarbonate-buffered, with energy sources suited to sperm and oocytes together, for conventional insemination (page 24).
- Cleavage and blastocyst media: bicarbonate-buffered culture media for the developing embryo.
- Sperm preparation media and gradients: used on the andrology bench (pages 10 and 11).
- Special-purpose solutions: hyaluronidase for denudation (page 25), PVP for ICSI (page 30), and cryoprotectant solutions (page 47).
Sequential or single-step culture
The embryo's needs change. Before compaction it relies mainly on pyruvate and lactate; later it takes up more glucose and needs more amino acids. Sequential media provide two formulations, and the embryo is moved from the first to the second, usually on Day 3. Single-step (sometimes called global) media are designed to support the embryo from fertilisation to blastocyst without a change, so the dish is disturbed less. Both approaches are in wide use. Your laboratory's protocol decides which you use, and you must never mix systems without instruction.
Protein
Culture media contain a protein source, usually human serum albumin, sometimes with other serum proteins. Protein supports the embryo and stops cells from sticking to plastic.
Oil overlay
Culture drops are covered with a layer of light paraffin or mineral oil. The oil slows evaporation, so the concentration of salts in the drop stays stable; it buffers changes in temperature and pH when a dish is taken out; and it reduces the risk of airborne contamination. Oil is not inert, however. It can be oxidised by light and heat, producing peroxides that are toxic to embryos, and it can absorb VOCs from the air. Store oil in the dark at the temperature its maker states, and use only oil tested for embryo culture.
Testing and quality of media and plastics
Media and contact consumables (dishes, pipettes, tubes, catheters) should be produced for IVF use and tested before release. Typical tests include a mouse embryo assay (do mouse embryos develop normally in contact with the product?), endotoxin testing and sterility testing. Plastics are tissue-culture grade. Many laboratories also run their own in-house checks, such as a sperm survival test, when a new lot or a new product is introduced.
At the bench
- On receipt, check the delivery temperature record, the expiry date and the lot number. Record them in the media log.
- Store media refrigerated as the label states. Do not freeze unless the maker says you may. Keep away from light.
- Use first in, first out. Never use media past the expiry date or after the in-use period stated by the maker once opened.
- Open bottles aseptically in the workstation. Take out what you need; never pour unused media back.
- Equilibrate culture media under oil in the incubator for the time your protocol states, usually overnight, so the pH and temperature are correct before gametes go in.
- Record the lot number of every medium, oil and key consumable used for each patient, so that any problem can be traced.
Common errors
- Leaving media or oil on a bright windowsill or in a warm room
- Using a medium after its in-use period because "it looks fine"
- Placing gametes in a culture medium that has not been equilibrated
- Mixing the media of two different systems in one culture
- Not recording lot numbers, so a problem cannot be traced
Check yourself
- Why are handling media buffered differently from culture media?
- What is the difference between sequential and single-step culture, and when would an embryo be moved in a sequential system?
- List three things oil overlay does for the culture drop, and one way oil can harm embryos.
- What is a mouse embryo assay used for?
Questions on this page
Which culture system is better, sequential or single-step?
Both are in wide use and both support blastocyst development. Your laboratory chooses one and uses it consistently.
Why does the lot number matter?
If embryos develop poorly, the lot numbers let the laboratory trace whether a particular batch of medium, oil or plastic is the cause.
The Genesis ART Textbook is teaching text for trainees and doctors of the Genesis ART Academy. It is not treatment advice and not a laboratory standard operating procedure; every technique is learned under supervision. Page numbers never change.
