IVF centre in Goa
Consultations in Panjim · Margao · Mapusa · Vasco
Call
Page 49 of 72Genesis ART Textbook
Part 4: Cryopreservation and vitrification · Day 9
Page 49 of 72

The cryo-bank: labelling, storage and retrieval

On this page you will learn

What the cryo-bank is

The cryo-bank is the part of the laboratory where sperm, testicular tissue, oocytes and embryos are kept in liquid nitrogen, sometimes for many years. At about minus 196 °C nothing biological changes, so a vitrified blastocyst stored correctly is, for practical purposes, the same blastocyst years later. The real risks in a cryo-bank are therefore not biological. They are human and mechanical: a wrong label, a lost record, a tank that runs dry, or a sample that warms up while someone searches for it. Everything on this page is about those risks.

Labelling

A label must survive liquid nitrogen, stay readable through frost and identify the sample without reference to anything else. Use printed cryo-labels or a cryo-safe marker on the device itself, never only on the outer holder. Every device carries at least two unique identifiers, usually the full name of the patient and a unique laboratory or cycle number, plus the date of freezing and what is inside (for example, day 5 blastocyst, oocytes, or sperm). A colour code per patient helps you find things; it never replaces reading the label.

Label before you vitrify, not after. A device that already holds cells cannot wait at room temperature while you look for a pen.

How storage is organised

Storage is a nest of containers. The dewar (storage tank) holds several canisters. Each canister holds goblets or storage tubes, and each goblet holds straws or carrier devices. Every position has an address, such as tank B, canister 4, goblet 2, upper level. That address goes into the storage map, which may be a paper register, a spreadsheet or a laboratory database (page 60). The register and the tank must match at all times; checking that they do is the cryo audit described on page 55.

Good practice separates samples by risk. Samples from patients with a positive screen for a blood-borne virus are kept in a separate, clearly marked tank, and many labs use closed or high-security devices for them. Sperm and embryos may also be kept in separate tanks so that one tank failure does not affect everything.

Keeping the tanks safe

At the bench: the retrieval drill

On Day 9 you practise retrieval with dummy straws, wearing the protective equipment from page 48. The aim is to find the right device first time and keep everything else cold.

  1. Before you open the tank, confirm the patient, the request and the storage address from the register with your witness.
  2. Prepare a small insulated box of liquid nitrogen beside the tank to receive the device.
  3. Lift the canister only as far as you need to reach the goblet. Keep the rest of the canister below the neck of the tank, in the cold vapour.
  4. Read the label with your witness. Both of you confirm name and unique number before the device moves.
  5. Transfer the device into the box of nitrogen at once, and lower the canister back.
  6. Record the time, the operator, the witness and the new status (withdrawn, warmed, moved) in the register.

Speed matters because every device you lift partly warms. A vitrified sample that is warmed slowly, even briefly, can form ice (page 45). The other devices in that canister are at risk too.

Storage, consent and the law

Under the ART (Regulation) Act 2021 and the rules made under it, gametes and embryos are stored only with written consent, for a limited period, and the clinic keeps records that can be inspected. Consent states how long the material is stored and what happens if a couple separate, if one partner dies, or if storage is not renewed. The laboratory does not decide these questions; it carries out what the consent form says. When storage is coming to an end, the clinic contacts the couple in good time. Always check the current text of the Act and the rules, because periods and procedures can change.

Common errors

Check yourself

  1. What two identifiers must every device carry, and where exactly should they be written?
  2. Why should a canister stay below the neck of the tank during a retrieval?
  3. Give three signs that a storage tank may be failing.
  4. Who decides what happens to stored embryos when storage is not renewed?

Contents and reading plan

Questions on this page

Is it enough to label the goblet if the straws inside belong to one patient?

No. Devices can fall out of goblets or be moved. The label must be on each device, with at least two unique identifiers.

Why keep samples with a positive viral screen in a separate tank?

Liquid nitrogen can carry contamination between open devices. A separate tank, and often a closed device, keeps that risk away from other patients.

How often should tank levels be checked?

On a fixed written schedule that your laboratory sets and records, including weekends, with alarms covering the hours in between.

The Genesis ART Textbook is teaching text for trainees and doctors of the Genesis ART Academy. It is not treatment advice and not a laboratory standard operating procedure; every technique is learned under supervision. Page numbers never change.