Reading a semen analysis as a clinician (WHO 2021)
On this page you will learn
- how the WHO 2021 manual wants semen results to be read
- which parts of the report change your management
- how to calculate the total motile count from a report
- when to repeat the test, and what not to order
The report is a tool for a decision
The sixth edition of the World Health Organization (WHO) semen manual, published in 2021, changed the way results are read. Its figures come from men whose partners conceived within a year. The lower reference limit is the fifth centile of those men: ninety-five in every hundred of them had a value at or above it. The manual stresses that these limits are not a dividing line between fertile and infertile men.
A commentary on the new edition put the shift plainly: the result is there to help decide the next step in investigation and treatment, not to label a man. A result below a limit does not mean he cannot father a child; a result above every limit does not prove that he can. The table of limits is on Lab Textbook page 9.
Source: 2021, World Health Organization - WHO laboratory manual for the examination and processing of human semen, sixth edition
Source: 2021, Boitrelle et al., Life 11(12):1368 - The sixth edition of the WHO manual for human semen analysis: a critical review and SWOT analysis
Check the conditions first
Before you read a single number, read the top of the report: days of abstinence, whether the sample was complete, the time between collection and analysis, and any fever or new medicine in the last three months. A spilt first portion lowers the count. A long abstinence raises volume and count but may lower motility. A recent fever can depress the result for weeks.
Source: 2021, World Health Organization - WHO laboratory manual for the examination and processing of human semen, sixth edition
What changes your management
- No sperm (azoospermia), or a very low count: repeat soon, and start the male assessment at once (page 11).
- Total sperm number and progressive motility: together they decide whether enough moving sperm can be prepared for IUI.
- Morphology: on its own a weak guide to the choice of treatment; read it with the count and motility, never alone.
- Round cells and leucocytes: many white cells may point to infection or inflammation and need clinical review.
- Low volume or a low pH: may point to partial collection, an obstruction or retrograde ejaculation (page 30).
NICE advises against routine testing for antisperm antibodies and against sperm DNA fragmentation testing. Do not order tests that will not change what you do.
Source: 2026 (31 Mar), NICE - Fertility problems: assessment and treatment (guideline NG257)
The total motile count
The total motile count (TMC) is the number of progressively motile sperm in the whole ejaculate. It is simple to work out from a report:
- Take the volume in millilitres.
- Multiply by the concentration in millions per millilitre. This gives the total number in millions.
- Multiply by the fraction that are progressively motile (for example, 30 in every 100 = 0.3).
- The answer is the TMC, in millions.
Example: 2.5 millilitres, 20 million per millilitre, 40 in every 100 progressively motile. TMC = 2.5 x 20 x 0.4 = 20 million. What matters for IUI is the number recovered after the wash, which is always lower than this. Page 28 shows how that post-wash count is measured and used.
Source: 2021, World Health Organization - WHO laboratory manual for the examination and processing of human semen, sixth edition
Repeat before you conclude
Semen quality varies from one sample to the next in the same man. If the first analysis is abnormal, offer a repeat, ideally about three months later so that a full cycle of sperm production has passed. If no sperm or very few are found, repeat as soon as possible. After two or more abnormal results, examine the scrotum and testes and consider measuring testosterone and gonadotropins (page 11).
Source: 2026 (31 Mar), NICE - Fertility problems: assessment and treatment (guideline NG257)
At the bench
You will observe a semen analysis at the andrology bench from start to finish, from liquefaction to the written report. Then read the report back to the embryologist in your own words: the conditions, the key numbers, the TMC, and what you would do next. This is observed; your own hands-on work is sperm preparation, from Day DI-2.
Common mistakes
- Calling a man "infertile" because one value is below the WHO limit
- Ignoring abstinence days and a spilt sample when reading the numbers
- Repeating a poor test after two weeks instead of about three months
- Ordering sperm DNA or antibody tests that will not change the plan
- Using the raw TMC as if it were the post-wash count
Key points
- WHO 2021 limits are fifth centiles, not fertile/infertile cut-offs
- Read collection conditions before the numbers
- TMC = volume x concentration x progressive fraction
- Repeat an abnormal test at about three months; sooner if no sperm
Check yourself
1. What is a WHO 2021 lower reference limit?
The fifth centile among men whose partners conceived within a year.
2. Why read abstinence days and completeness first?
They change volume, count and motility.
3. Calculate the TMC: 3 millilitres, 10 million per millilitre, 50 in 100 progressive.
3 x 10 x 0.5 = 15 million.
4. Which two tests does NICE advise against ordering routinely?
Antisperm antibodies and sperm DNA fragmentation.
5. When is a repeat done sooner than three months?
When no sperm, or very few, are found.
6. From page 5: why is a three-month gap chosen?
It is about the time a sperm takes to form and mature.
Training note. Training content for registered medical practitioners. Trainees observe all patient care; they do not treat patients during the programme.
The Genesis Doctors' Textbook is teaching text for registered medical practitioners on the doctor programmes of the Genesis ART Training Academy. It is not treatment advice and gives no medicine doses; trainees observe all patient care, ultrasound scans are watched only (PCPNDT Act), and bench skills are practised under supervision. Page numbers never change.
