IVF centre in Goa
Consultations in Panjim · Margao · Mapusa · Vasco
Call
Page 65 of 72Genesis ART Textbook
Part 6: Clinical ART for doctors · Doctor programmes
Page 65 of 72

Endometrial scanning

On this page you will learn

The endometrium in ART

The embryo implants in the endometrium, so every cycle that ends in insemination or transfer includes a look at it. Ultrasound cannot prove that the endometrium is receptive, but it can show that it has grown, that it has the expected pattern for the cycle phase, and that nothing in the cavity is likely to get in the way.

Measuring thickness

Obtain a true mid-sagittal view of the uterus, with the endometrial line running continuously from the fundus to the cervical canal. Measure at the thickest point, perpendicular to the midline, from the outer edge of one layer to the outer edge of the other, so you include both layers. If there is fluid in the cavity, measure each layer separately and add them, and record the fluid. Repeat if your first image is oblique; an off-axis view overestimates thickness. Use the same technique at every visit so that measurements can be compared across the cycle.

Pattern through the cycle

In a frozen embryo transfer cycle (page 41), the endometrium is followed to decide when progesterone is started and so when the transfer will take place. A thin or poorly patterned endometrium is reported to the treating consultant, who decides whether to continue, extend preparation or cancel.

What to look for in the cavity

At the bench: an endometrial scan

  1. Check identity and cycle day; consent and a chaperone, as on page 64.
  2. Find the mid-sagittal plane and freeze an image only when the line is continuous.
  3. Measure double-layer thickness at the widest point. Take two measurements and record the larger only if both are true sagittal views.
  4. Describe the pattern: triple-line, intermediate or uniformly bright.
  5. Turn to the transverse plane and sweep from cervix to fundus to look for lesions.
  6. Use colour Doppler on any focal lesion.
  7. Record thickness, pattern, any fluid and any lesion with its size and position, and save representative images.

Common errors

Check yourself

  1. Describe how to measure endometrial thickness when there is fluid in the cavity.
  2. What does a triple-line pattern indicate about the cycle phase?
  3. Which fibroids matter most for implantation, and why?
  4. Why should cavity fluid be reported before an embryo transfer?

Contents and reading plan

Questions on this page

Does a thick endometrium mean implantation will happen?

No. Ultrasound shows growth and pattern and can find lesions, but it cannot prove the lining is receptive.

When are polyps easiest to see?

In the proliferative phase, when the surrounding endometrium is less bright, and with colour Doppler showing a feeding vessel.

Who decides what to do about a thin lining?

The treating consultant, after the scan findings are reported.

The Genesis ART Textbook is teaching text for trainees and doctors of the Genesis ART Academy. It is not treatment advice and not a laboratory standard operating procedure; every technique is learned under supervision. Page numbers never change.